Developer Preview release
Google's Home Developer program allows device manufacturers to connect their smart home devices with the Google Home ecosystem. We are expanding the Smart Home Actions local fulfillment path with an ability to add Matter-enabled devices for setup using the Google Home app (GHA) and control them using Google Assistant, GHA, or smart displays like the Google Nest Hub (2nd gen).
This documentation describes how to get started with building and integrating a Matter-supported platform in the Google Home ecosystem.
Regarding the procedures described in this Developer Preview of Matter, be aware of the following:
- The account used for development should only have a single Matter-enabled hub connected for testing. Multiple Matter-enabled hubs connected at the same time or connected to the same structure during testing could result in unpredictable behavior.
- All procedures assume the use of a Linux machine running Ubuntu 20.04 for building and flashing Matter samples, which have been tested by Google. While MacOS machines are supported, Linux is recommended. Mac-specific instructions are called out in the procedures as needed.
The following terms are used throughout this documentation:
- Border router
- A hub that implements a general-purpose Thread Border Router for Thread-enabled devices.
- A supported Google Nest device, such as the Google Nest Hub (2nd gen). A hub is required to control Matter-enabled devices through other surfaces such as Assistant, the GHA, and smart displays.
- Matter-enabled device
- A device or development board that has been flashed with a Matter-enabled build or sample app.
- Mobile device
- The test phone used to assist with pairing. Currently this is an Android phone.
In order to fully integrate a Matter-enabled device with the Google Home ecosystem, a developer must have:
- A Google hub with Thread support to serve as both a Border Router for Thread-enabled devices and as a local fulfillment path for routing Smart Home intents.
- A mobile device (test phone) that meets the minimum requirements:
- Android O (8.1, API level 27 or newer)
- iOS (v16.5 or newer)
- BLE capability
- A Vendor ID (VID) and Product ID (PID) for the Matter-enabled device.
- A Matter-enabled device. This device should be one of
the Matter device types currently supported in the
Google Home ecosystem, and could be:
- Your own product with Matter-enabled firmware.
- A development board of a supported vendor platform that can serve as a Matter-enabled device for end-to-end verification. The following platforms are supported:
|Bouffalo Lab||BL602||Quick Start|
|Nordic Semiconductor||nRF52840 DK||Quick Start
|NXP||IOTZTB-DK006 development kit||Quick Start|
|Realtek||Ameba D Series||Quick Start|
|Silicon Labs||EFR32MG24 Dev Kit||Quick Start|
|EFR32MG Zigbee and Thread Starter Kit||Quick Start|
|Texas Instruments||CC2652R7 LaunchPad development kit||Quick Start|
By default, you can use one of the VIDs allocated by the CSA for testing
purposes. Select one of the following:
To use a Production VID so that your integration can be certified and launched, you must first have it verified by Google to ensure that it has been issued to you by the CSA.
This VID should be implemented in your device's firmware.
A Matter device can only be paired in the Google Home ecosystem in certain Vendor ID and device type scenarios.
- A test VID cannot be used in a consumer device.
- Your production VID must issued by the CSA. Google will validate you're the owner of that VID before you can use it in the Google Home Developer Console. Once that happens you'll be able to create integrations for that VID.
- For development and field trial purposes, a project and integration with the corresponding VID and PID combination must be created in the Developer Console. The user commissioning the device must either be a member of the project or be included in the list of field trial users.
- Consumer users can only use your product once it has been certified by the CSA.
|Which types of users can commission the device into the Google Home ecosystem?|
|VID type||VID certification and console integration status||Production
(Developers, Field Trial users)
|Test||No integration in the Developer Console (cannot be certified)|
|Test||Integration exists in the Developer Console (cannot be certified)|
|Production||Not certified, integration does not exist in the Developer Console|
|Production||Not certified, integration exists in the Developer Console|
|Production||Certified in the CSA DCL, integration does not exist in the Developer Console|
|Production||Certified in the CSA DCL and integration exists in the Developer Console|
Information about the device is read from the Matter Basic Information Cluster. The Product ID encoded in your device's firmware must match the Product ID of the Matter integration in the Developer Console.
Some Matter clusters are not yet exposed to users, though they may be used by the system. In most cases, this means that attributes exposed via these clusters will not be visible to end users:
¹ See On/Off Light Switches for how this impacts On/Off Light Switches.