# Smart Home TemperatureSetting Trait Schema `action.devices.traits.TemperatureSetting` - This trait covers handling both temperature point and modes. ## Device ATTRIBUTES Devices with this trait may report the following attributes as part of the [`SYNC`](https://developers.home.google.com/cloud-to-cloud/intents/sync) operation. To learn more about handling `SYNC` intents, see [Intent fulfillment](https://developers.home.google.com/cloud-to-cloud/integration/sync). | Attributes | Type | Description | |---|---|---| | `availableThermostatModes` | | **Required.** Describes the thermostat modes this device can support. | | *Supports one of the following:* ||| | `*0*` | *String* | *Deprecated* Comma-separated list of modes supported by this specific device. New integrations should use the `Array` form of this attribute. Must match pattern: `^((off|heat|cool|on|heatcool|auto|fan-only|purifier|eco|dry|),?)+$`. | | `*1*` | *Array* | List of modes supported by this specific device. | | `[*item, ...*]` | *String* | Name of the supported mode. Supported values: `off` : Heating/Cooling activity disabled `heat` : Device supports heating `cool` : Device supports cooling `on` : Restore the previous mode of the device. The `on` mode does not appear in the mode selection screen because the `on` mode, by design, is used to restore the previous mode of the device. `heatcool` : Maintaining heating/cooling target as a range `auto` : Automatic mode with temperature set by a schedule or learned behavior `fan-only` : Fan running without heat/cool activity `purifier` : Purifying mode `eco` : Energy-saving mode `dry` : Dry mode | | `thermostatTemperatureRange` | *Object* | Contains two float values that indicate the supported temperature range for this device (in degrees Celsius). | | `minThresholdCelsius` | *Number* | **Required.** Minimum threshold of the temperature range. | | `maxThresholdCelsius` | *Number* | **Required.** Maximum threshold of the temperature range. | | `thermostatTemperatureUnit` | *String* | **Required.** The display unit the device is set to by default. Google reports temperature information using the display unit. Supported values: `C` `F` | | `bufferRangeCelsius` | *Number* | (Default: `2`) Specifies the minimum offset between heat-cool setpoints in degrees Celsius, if `heatcool` mode is supported. | | `commandOnlyTemperatureSetting` | *Boolean* | (Default: `false`) Indicates if the device supports using one-way (true) or two-way (false) communication. Set this attribute to true if the device cannot respond to a QUERY intent or Report State for this trait. | | `queryOnlyTemperatureSetting` | *Boolean* | (Default: `false`) Required if the device supports query-only execution. This attribute indicates if the device can only be queried for state information, and cannot be controlled. | #### Examples *Thermostat device that supports discrete heating and cooling* ``` { "availableThermostatModes": [ "off", "heat", "cool", "on" ], "thermostatTemperatureUnit": "F" } ``` *Command-only thermostat device* ``` { "availableThermostatModes": [ "off", "heat", "cool", "on" ], "thermostatTemperatureUnit": "C", "commandOnlyTemperatureSetting": true, "queryOnlyTemperatureSetting": false } ``` ## Device STATES > [!NOTE] > **Note 1:** States are only relevant if the attribute `commandOnlyTemperatureSetting` is set to false. > [!NOTE] > **Note 2:** Temperatures can be set in Fahrenheit by the user, but all temperature values in commands and states are in Celsius. Entities with this trait may report the following states as part of the [`QUERY`](https://developers.home.google.com/cloud-to-cloud/intents/query) operation. To learn more about handling `QUERY` intents, see [Intent fulfillment](https://developers.home.google.com/cloud-to-cloud/integration/query-execute). | States | Type | Description | |---|---|---| | `activeThermostatMode` | *String* | Currently active mode of the device, from the list of `availableThermostatModes`. If no mode is currently active, set to `none`. Supported values: `none` : No active mode `off` : Heating/Cooling activity disabled `heat` : Device supports heating `cool` : Device supports cooling `on` : Restore the previous mode of the device. The `on` mode does not appear in the mode selection screen because the `on` mode, by design, is used to restore the previous mode of the device. `heatcool` : Maintaining heating/cooling target as a range `auto` : Automatic mode with temperature set by a schedule or learned behavior `fan-only` : Fan running without heat/cool activity `purifier` : Purifying mode `eco` : Energy-saving mode `dry` : Dry mode | | `targetTempReachedEstimateUnixTimestampSec` | *Integer* | A timestamp representing the estimated time when the target temperature will be reached. | | `thermostatHumidityAmbient` | *Number* | Represents the relative level of the ambient humidity, if supported by the device. Value must be between `0` and `100`. | | *Contains one of the following items:* ||| | `*0*` | *Object* | States for fixed set point. | | `thermostatMode` | *String* | **Required.** Current mode of the device, from the list of `availableThermostatModes`. Supported values: `off` : Heating/Cooling activity disabled `heat` : Device supports heating `cool` : Device supports cooling `on` : Restore the previous mode of the device `auto` : Automatic mode with temperature set by a schedule or learned behavior `fan-only` : Fan running without heat/cool activity `purifier` : Purifying mode `eco` : Energy-saving mode `dry` : Dry mode | | `thermostatTemperatureAmbient` | *Number* | **Required.** Current observed temperature, in degrees Celsius. | | `thermostatTemperatureSetpoint` | *Number* | **Required.** Current temperature set point (single target), in degrees Celsius. | | `*1*` | *Object* | States for set point range. | | `thermostatMode` | *String* | **Required.** Current mode of the device, from the list of `availableThermostatModes`. Supported values: `off` : Heating/Cooling activity disabled `heat` : Device supports heating `cool` : Device supports cooling `on` : Restore the previous mode of the device `heatcool` : Maintaining heating/cooling target as a range `auto` : Automatic mode with temperature set by a schedule or learned behavior `fan-only` : Fan running without heat/cool activity `purifier` : Purifying mode `eco` : Energy-saving mode `dry` : Dry mode | | `thermostatTemperatureAmbient` | *Number* | **Required.** Current observed temperature, in degrees Celsius. | | `thermostatTemperatureSetpointHigh` | *Number* | **Required.** Current high point if in `heatcool` mode, for a range. | | `thermostatTemperatureSetpointLow` | *Number* | **Required.** Current low point if in `heatcool` mode, for a range. | #### Examples *What is the current device temperature?* ``` { "activeThermostatMode": "cool", "thermostatMode": "cool", "thermostatTemperatureSetpoint": 23, "thermostatTemperatureAmbient": 25.1 } ``` *What is the current device temperature?* ``` { "activeThermostatMode": "none", "thermostatMode": "heatcool", "thermostatTemperatureSetpointHigh": 26, "thermostatTemperatureSetpointLow": 22, "thermostatTemperatureAmbient": 25.1 } ``` ## Device COMMANDS > [!NOTE] > **Note:** Temperatures can be set in Fahrenheit by the user, but all temperature values in commands and states are in Celsius. Any required unit conversion is performed automatically. > [!NOTE] > **Note:** This trait supports providing additional state with a secondary user verification challenge response. See [supported challenge types](https://developers.home.google.com/cloud-to-cloud/enhancements/secondary-user-verification#supported_challenge_types) for more details. Devices with this trait may respond to the following commands as part of the [`EXECUTE`](https://developers.home.google.com/cloud-to-cloud/intents/execute) operation. To learn more about handling `EXECUTE` intents, see [Intent fulfillment](https://developers.home.google.com/cloud-to-cloud/integration/query-execute#handle_execute_intents). ### `action.devices.commands.ThermostatTemperatureSetpoint` Set the target temperature for a thermostat device. #### Parameters | Parameters | Type | Description | |---|---|---| | `thermostatTemperatureSetpoint` | *Number* | **Required.** Target temperature setpoint. Supports up to one decimal place. | #### Examples *Set the device temperature to 22 degrees.* ``` { "command": "action.devices.commands.ThermostatTemperatureSetpoint", "params": { "thermostatTemperatureSetpoint": 22 } } ``` #### Related errors An error occurred setting the target temperature. Supported values: `alreadyAtMax` `alreadyAtMin` `targetAlreadyReached` `valueOutOfRange` ### `action.devices.commands.ThermostatTemperatureSetRange` Set a target temperature range for a thermostat device. This command requires the following attributes: ``` { "availableThermostatModes": [ "heatcool" ] } ``` #### Parameters | Parameters | Type | Description | |---|---|---| | `thermostatTemperatureSetpointHigh` | *Number* | **Required.** High target setpoint for the range. Requires `heatcool` mode support. | | `thermostatTemperatureSetpointLow` | *Number* | **Required.** Low target setpoint for the range. Requires `heatcool` mode support. | #### Examples *Hold the temperature between 22 and 26 degrees.* ``` { "command": "action.devices.commands.ThermostatTemperatureSetRange", "params": { "thermostatTemperatureSetpointHigh": 26, "thermostatTemperatureSetpointLow": 22 } } ``` #### Related errors An error occurred setting the target range. Supported values: `alreadyAtMax` `alreadyAtMin` `lockedToRange` `rangeTooClose` `targetAlreadyReached` `valueOutOfRange` ### `action.devices.commands.ThermostatSetMode` Set the target operating mode for a thermostat device. #### Parameters | Parameters | Type | Description | |---|---|---| | `thermostatMode` | *String* | **Required.** Target mode, from the list of `availableThermostatModes`. Supported values: `off` : Heating/Cooling activity disabled `heat` : Device supports heating `cool` : Device supports cooling `on` : Restore the previous mode of the device `heatcool` : Maintaining heating/cooling target as a range `auto` : Automatic mode with temperature set by a schedule or learned behavior `fan-only` : Fan running without heat/cool activity `purifier` : Purifying mode `eco` : Energy-saving mode `dry` : Dry mode | #### Examples *Set the device to heatcool mode.* ``` { "command": "action.devices.commands.ThermostatSetMode", "params": { "thermostatMode": "heatcool" } } ``` #### Related errors An error occurred setting the target mode. Supported values: `inAutoMode` `inAwayMode` `inDryMode` `inEcoMode` `inFanOnlyMode` `inHeatOrCool` `inHumidifierMode` `inOffMode` `inPurifierMode` ### `action.devices.commands.TemperatureRelative` Adjust the target temperature relative to the current state. This command requires the following attributes: ``` { "commandOnlyTemperatureSetting": true } ``` #### Parameters The payload contains one of the following: #### Adjust by degree. | Parameters | Type | Description | |---|---|---| | `thermostatTemperatureRelativeDegree` | *Number* | **Required.** The exact number of degrees for the temperature to change (for example, "Turn down 5 degrees"). | #### Adjust by weight. | Parameters | Type | Description | |---|---|---| | `thermostatTemperatureRelativeWeight` | *Integer* | **Required.** This indicates the amount of ambiguous temperature change from a small amount ("Turn down a little"), to a large amount ("A lot warmer"). Value must be between `-5` and `5`. | #### Examples *Increase temperature 5 degrees* ``` { "command": "action.devices.commands.TemperatureRelative", "params": { "thermostatTemperatureRelativeDegree": 5 } } ``` *Decrease the temperature a lot* ``` { "command": "action.devices.commands.TemperatureRelative", "params": { "thermostatTemperatureRelativeWeight": -5 } } ``` #### Related errors An error occurred adjusting the temperature. Supported values: `alreadyAtMax` `alreadyAtMin` `valueOutOfRange` ## Sample utterances > [!NOTE] > This is a sample of the utterances supported by this device trait, make sure to also review other [supported languages](https://developers.home.google.com/cloud-to-cloud/traits#supported-languages). ### de-DE - Auf welche Temperatur ist *das Thermostat im Wohnzimmer* eingestellt - Auf welchem Modus steht *das Thermostat* ? - *Heizmodus* anmachen - Ist *der Kühlmodus* an? - Mach *den Heizmodus* aus - Schalt *den Heizmodus* *vom Thermostat* aus - Temperatur auf *20 bis 25 Grad* einstellen. - *Thermostat* auf *20 bis 25 Grad* stellen. - *Thermostat im Schlafzimmer* kälter stellen - Welche Temperatur zeigt *das Thermostat* an - *Wohnzimmer* auf *Kühlen* umstellen - bitte dreh *das Thermostat* *ein bisschen* herunter - bitte dreh *das Thermostat* *etwas* höher - bitte mach es *im Wohnzimmer* kühler - bitte mach es *in der Küche* *etwas* kälter - bitte stell *das Thermostat* *5 Grad* wärmer ein - bitte stell *das Thermostat* auf *21 Grad* *für Kühlen* ein - bitte stell *das Thermostat* auf *30 Grad* - bitte stell die Temperatur *im Schlafzimmer* auf *20 Grad* - dreh *das Thermostat* wärmer bitte - dreh die Temperatur *im Schlafzimmer* *etwas* nach oben - dreh die Temperatur um *5 Grad* runter - erhöhe bitte die Temperatur *im Bad* - erhöhe die Temperatur um *2 Grad* - mach es *im Wohnzimmer* *2 Grad* wärmer - senke die Temperatur *im Wohnzimmer* um *5 Grad* - stell bitte *das Thermostat* auf *Kühlen* - stell *das Thermostat* *5 Grad* kälter ein - stell *die Kühlung* auf *20 Grad* ein ### en-US - Turn off *heat* mode. - change *the thermostat* *heat cool* *between 70 and 80* - change to *eco* mode - cool down in *the living room* - cool down *the house* *a little* - current *thermostat* temperature setting - increase the temperature on *the thermostat* - is the *heating* on - maintain *the thermostat* *heat* at *78* - make it *2 degrees* warmer - make it cooler by *2 degrees* - make *thermostat* warmer *a little bit* - put on *cooling* mode - put *the thermostat* on *cool* - raise the temperature *downstairs* by *2 degrees* - raise the temperature on *thermostat* by *5 degrees* - set *70 degrees* on *the thermostat* - set *heat cool* mode to *between 62 and 79 degrees* - set my temperature *80 degrees* - set the *heat* to *72* - set the temperature to *cool* at *70* - set *the thermostat* at *70* in *cool* mode - tell me *the thermostat* temperature reading - turn down *5 degrees* on *thermostat* - turn down *the living room* temp *2 degrees* - turn off *thermostat* *heat* mode - turn *thermostat* *a little* lower - turn *thermostat* lower - warm up *the living room* - warm up *the living room* *a little* - what mode is *the thermostat* ### es-ES - *25 grados* de *frío* en *la cocina* - Ajustar *el termostato* *entre 21 y 26 grados* - Ajustar la temperatura *entre 21 y 27 grados* - a cuántos grados tengo puesto *el aire en el salón* - activar el modo *calefacción* - apagar *el aire acondicionado* del *termostato* - aumenta *10 grados* la temperatura del *horno* - aumenta la temperatura de *la cocina* - baja *algo* *la calefacción* - baja la temperatura *5 grados* - baja la temperatura del *termostato* - configurar el modo *calefacción* - dime si el salón está en modo *frío* - disminuye la temperatura de la cocina *un poco* - hace demasiado calor aquí - me ajustas a *25 grados* el modo *calor* - me gustaría ajustar *el termostato del salón* a *25 grados* con *la calefacción* - pon a *20 grados* la temperatura - pon en modo *calefacción* *el termostato de la cocina* - pon la temperatura de *la cocina* a *20 grados* - puedes subir *un poco* la temperatura en *el salón* - quiero bajar *el nest* *5 grados* - quiero el modo *aire acondicionado* a *25 grados* - quitar el modo *frío* del *baño* - qué modo tengo puesto en *el aire* - qué temperatura hace en *el salón* - sube *5 grados* en *la cocina* - sube *la calefacción* - súbeme *el termostato del salón* *un poquito* - súbeme más la temperatura *10 grados* ### fr-FR - Allumer le mode *chaud* . - Est-ce que le mode *froid* est allumé ? - Mets en mode *chaud* . - Mets la température *entre 21 et 23 degrés* . - Mets la température à *17 degrés* . - Mets le mode *froid* du *thermostat* à *19 degrés* . - Mettre le mode *froid* à *19 degrés* . - Mettre *le thermostat* *entre 70 et 80 degrés* . - Régler le mode *chaud* du *thermostat* à *22 degrés* . - Régler le mode *chaud* à *22 degrés* . - augmente la température de *2 degrés* - augmente *un peu* la température dans la chambre - baisse la température de *la chambre* - baisse *le thermostat* - baisse *un peu* la température dans *la cuisine* - baisse *un peu* *le thermostat* - baisser *le thermostat* de *5 degrés* - coupe le mode *chaud* - descends la température de *3 degrés* - désactiver le mode *frais* du *thermostat* - *le thermostat* est réglé sur combien - mets *le thermostat* en mode *frais* - mets *le thermostat* à *10 degrés* - mettre *2 degrés* de moins dans *la cuisine* - monte la température de la chambre - monte la température de *la salle de bain* de *3 degrés* - monte *le thermostat* - monte *le thermostat* de *2 degrés* - monte *un peu* *le thermostat* - quel est le mode du *thermostat* ? - quelle est la température du *thermostat* - Éteins le mode *chaud* du *thermostat* . ### hi-IN - *thermostat* का *हीट* *20* तक कर दो - *कूलिंग* को *70 डिग्री* पर सेट करो - *कूलिंग* चालू करो - *कूलिंग* मोड को बंद कर दो - टेम्परेचर को *17 डिग्री* पर सेट कर दो - तापमान *2 डिग्री* कम करो - *थर्मोस्टेट* *70 डिग्री* पर सेट करो - *थर्मोस्टेट* का टेम्प्रेचर *५ डिग्री* घटाओ - *थर्मोस्टेट* का टेम्प्रेचर *५ डिग्री* बढ़ाओ - *थर्मोस्टेट* का तापमान क्या है - *थर्मोस्टेट* का तापमान ज्यादा करो - *थर्मोस्टेट* को *कूलिंग* मोड में सेट करो - *थर्मोस्टैट* का *कूलिंग* मोड बंद करोगी - *थर्मोस्टैट* का तापमान ज़्यादा कर दो - *थर्मोस्टैट* किस मोड पर सेट है - *थर्मोस्टैट* के *हीटिंग और कूलिंग* मोड को *70 और 80 डिग्री के बीच* रखें. - *थर्मोस्टैट* को कम कर दो - *थारमोस्टेट* का तापमान *थोड़ा* कम करें - *थारमोस्टेट* का तापमान *थोड़ा* बढ़ाओ - देखना ज़रा *कूलिंग* चालू है क्या - बेडरूम का टेंप्रेचर *5 डिग्री* ज्यादा कर देना - बेडरूम का टेंप्रेचर *थोड़ा* कम कर देना - *बेडरूम* का टेंप्रेचर ज़्यादा कर देना - बेडरूम का तापमान *थोड़ा* ज़्यादा करो - मुझे *थर्मोस्टेट* का तापमान बताना - मेरे लिए *लिविंग रूम* का तापमान कम करिये - सभी *थर्मोस्टैट्स* की *कूलिंग* को *70 डिग्री* पर सेट कर दो - *हीटिंग-कूलिंग* मोड *30 और 40 डिग्री के बीच* रखो। - *हीटिंग-कूलिंग* मोड पर सेट करो ### it-IT - Alza di *due gradi* la temperatura della camera da letto - Imposta *il termostato* *tra 20 e 25 gradi* . - Metti la temperatura *tra 15 e 20 gradi* . - a quanto è *il termostato* - a quanto è impostato *il termostato* - abbassa di *8* *in cucina* - abbassa la temperatura - abbassa la temperatura *della caldaia* - abbassa la temperatura *della caldaia* di *3 gradi* - abbassa la temperatura di *due gradi* - abbassa *leggermente* *la caldaia* - alza *il termostato* - aumenta *un po'* *la caldaia* - disattiva la modalità *eco* - disattiva la modalità *eco* *del riscaldamento della cucina* - fai aumentare *leggermente* la temperatura - imposta *il condizionatore* su *raffreddamento* - metti il *raffreddamento* a *20 gradi* - metti *il termostato* a *25* - metti *il termostato* in modalità *eco* - metti la modalità *condizionatore* *del termostato* a *40 gradi* - metti la modalità *riscaldamento* *del termostato* a *30 gradi* - metti la temperatura *un po'* più bassa - puoi aumentare di *3* *la caldaia* - puoi mettere più caldo - setta *5 gradi* più caldo - setta la temperatura su *20 gradi* - su che modalità è impostato *il riscaldamento in camera* ? - voglio *l'aria condizionata* settata su *eco* - è accesa la modalità *eco* ? ### ja-JP - *2 度* 暖かくして - *2 度* 涼しくして - *エアコン* の *冷房* の温度を *18 度* にして - *エアコン* *暖房* を *25 度* にして - *キッチン* を *少し* 涼しくして - *キッチン* を涼しくして - *サーモスタット* の *エコ* モードを切って - *サーモスタット* の温度 *28 度* にして - *サーモスタット* の温度を *10 度* 下げて - *サーモスタット* の温度を *2 度* 上げて - *サーモスタット* の温度を *20度から25度* にセット - *サーモスタット* の温度を *ちょっと* 上げて - *サーモスタット* の温度を下げて - *サーモスタット* の温度を高くして - *サーモスタット* の温度 *少し* 下げて - *サーモスタット* は何モードに設定されてる - *サーモスタット* は何度になっているの - *サーモスタット* を *冷房* に変えて - *ヒートクール* に変更して - *ヒートクール* モードを消して - *リビング* の温度 *20 度* にしてください - *リビング* は *エコ* モードに設定されている - *リビング* を *少し* 暖かくして - *リビング* を暖かくして - 今 *サーモスタット* は何度に設定されてる - *冷房* モードで *20度* に設定して - *冷房* モードオン - *台所* の温度 *5 度* 上げて - 温度を *20度から25度* にして ### ko-KR - *20도에서 30* 도 사이로 온도 유지해 - *거실* *24* 도로 맞춰 줘 - *거실* 온도 *2* 도 낮춰 줘 - *거실* 온도 내려 줘 - *거실* 온도 *조금만* 내려 - *난방* *20* 도로 조정해 줘 - *난방* 모드로 바꿔 줘 - *냉방* *20* 도로 조정해 - *냉방* 켜 줘 - *안방* 온도 더 올려 줘 - 온도 *2* 도 높게 설정 - 온도 *2* 도만 내려 줘 - *온도 조절기* *10* 도 내려 줘 - *온도 조절기* *20* 도로 설정해 줘 - *온도 조절기* *난방* 꺼 줘 - *온도 조절기* *난방* 모드로 변경해 - *온도 조절기* 낮춰 줘 - *온도 조절기* 모드 뭐야 - *온도 조절기* 설정 온도 얼마야 - *온도 조절기* 온도 *10* 도 올려 - *온도 조절기* 온도 높여 줘 - *온도 조절기* 온도 *조금* 낮춰 줘 - *온도 조절기* 온도 *조금만* 올려 - *온도 조절기* 현재 온도 말해 줘 - *온도 조절기* 로 *난방* 온도 *23* 도로 맞춰 놔 - *온도 조절기* 로 *냉방* *23* 도로 설정해 - *온도 조절기* 를 *70도에서 80* 도 사이로 맞춰 - 지금 *안방* *난방* 중이야 - *침실* 온도 *2* 도 높여 줘 - *침실* 온도 *살짝* 높여 ### nl-NL - *De keuken* *wat* afkoelen - *De thermostaat* op *20 graden* zetten - Houd de temperatuur *tussen 20 en 25 graden* . - *Keuken* afkoelen - Maak het *2 graden* koeler - Maak het *2 graden* warmer - Op welke instelling staat *de thermostaat* - Staat *de koeling* aan - Stel *warmtemodus* op *de thermostaat* in op *24 graden* - Wat is de huidige instelling van *de thermostaat* - Zet *afkoelen* aan. - Zet *de koeling* op *24 graden* . - Zet *de thermostaat* *tussen 20 en 25 graden* . - *de keuken* *een beetje* verwarmen - *de thermostaat* *een beetje* verhogen - *de thermostaat* *een beetje* verlagen - *de thermostaat* met *5 graden* verlagen - *de thermostaat* verhogen - *de thermostaat* verlagen - verander naar *afkoelen* - verwarm *de keuken* - wat is de temperatuur op *de thermostaat* - zet *de koeling* op *de thermostaat* op *16 graden* - zet *de koelstand* op *de thermostaat* uit - zet de temperatuur op *25 graden* - zet *de verwarmingsstand* uit - zet *warmtemodus* op *20 graden* ### pt-BR - A que temperatura está definido *o termostato* ? - A que temperatura está *o termostato* ? - Ajustar a *refrigeração* do *termostato* para *23 graus* - Ajustar a *refrigeração* para *23 graus* - Ajuste *o termostato* para ficar *entre 15 e 20 graus* . - Aumentar a temperatura da *cozinha* . - Definir a temperatura como sendo *entre 15 e 17 graus* . - Definir a temperatura do *termostato* para *30 graus* . - Qual é a temperatura do *termostato* ? - abaixar *dois graus* a temperatura - abaixar *um pouco* a temperatura do *quarto* - abaixe a temperatura do *quarto* - ajustar a temperatura do quarto para *20 graus* - ajustar o *aquecimento* para *25 graus* - ajustar o *quente* do *termostato* em *25 graus* - ajustar *o termostato* para *aquecer* - aquecer *a sala* *um pouco* - aumenta a temperatura do *termostato* em *2 graus* - aumentar a temperatura do *termostato* - aumentar *bastante* *o termostato* - aumentar *três graus* a temperatura - baixa a temperatura do *termostato* em *5 graus* - colocar no *frio* - como *o escritório* está ajustado? - desativar o modo *aquecimento* do *termostato* - desativar o modo *refrescar* - diminuir *cinco graus* a temperatura do *escritório* - diminuir *o termostato* - qual a temperatura definida no *termostato* ? - qual é o status do *termostato* ? - quero diminuir *um pouco* *o termostato* ### sv-SE - Dra upp temperaturen på *termostaten* - Dra upp temperaturen på *termostaten* *lite grann* - Hur varmt är det i *vardagsrummet* ? - Höj värmen i *vardagsrummet* - Ställ in temperaturen på *20 till 25 grader* tack. - Ställ in *termostaten* *mellan 20 och 25 grader* . - Ställ in *värmen* på *AC:n* på *23 grader* - Sänk *sovrummets* temperatur - Sänk *sovrums* temperaturen *lite grann* - Sänk värmen i *hallen* med *2 grader* - Vad står *termostaten* på? - dra ner temperaturen med *2 grader* - gör en temperatursänkning på *termostaten* med *två grader* - höj temperaturen *2 grader* - höj *värmen* på *termostaten* till *24 grader* - jag vill att du höjer *värmen* på *elementen* till *25 grader* - kan du slå av *uppvärmningen* i *vardagsrummet* - kan du starta *uppvärmning* ? - kan du sätta på *värmen* ? - se till att höja tempen med *två grader* i *sovrummet* - ställ *termostaten* på *3 grader* varmare i köket - ställ *termostaten* på *uppvärmning* - stäng av *värmen* på *termostaten* - sänk temperaturen - sänk *termostaten* *lite* - sätt temperaturen på *25 grader* - sätt *termostaten* på *25 grader* - vilket läge är *termostaten* inställd på? - vrid ner temperaturen i *vardagsrummet* med *tre grader* - är *värmen* igång - öka värmen i *arbetsrummet* *ordentligt* ## Device ERRORS See the full list of [errors and exceptions](https://developers.home.google.com/cloud-to-cloud/intents/errors-exceptions).